7/25/2023 0 Comments Cetus3d printer passwordFollow the color.ĩ.2 Connect the limit switches from extension PCB to mainboard, using the included relay cable.ĩ.3 Connect the power cable from extension PCB to mainboardĩ.4 Loosen the connector (labelled as " Platform Heater) for ribbon cable. Install MK3 Z-axis Cap and Limit Switch.ĩ.1 Connec Z-limit switch and Y-limit switch to the extension board. Installation Guide of Extension PCB for Cetus MK3ĭetailed Guidance on Extension Board Installation and Limited Switch Issuesħ.2 Slide the extension board into extrusion slot. Install limit switch holder onto the Y-axis motor.Ħ.1 Open the slot cover on the back of the printer.Ħ.2 Press the holder into the slot, install the limit switch.Ħ.3 Position the motor cable and limit switch cable into the slot and press fit the slot cover.Ĭhapter 4. Remove the original printed part and the screw on the motor.ĥ.3. Install the limit switch on the holder.ĥ.2. Install the New Y Limit Switch Triggerĥ.1. Do not remove the screw from the belt, keep it on the belt!Ĥ.3. Lossen the screw on the back of the belt, remove the printed part. Install Y-axis Limit Switch and Trigger.Ĥ.2. Connect Ground Cable (reduce risk of static charge damage to electronics) Install MK3 Mainboard, CPU and SD card.ģ.4. Remove the 4 screws on mainboard, unplug the extruder cable, motor cables and remove the mainboard.ģ.2 Install the Mainboard Adaptor and MK3 Mainboard.ģ.3. Before remove the CPU, discharging yourself is recommended, also be careful not to bend the pin of the CPU board.Ģ.6. Remove the power cable and the initialization button cable.Ģ.4. Remove the platform by removing the 3 scerws.Ģ.2 Remove the 4 screws to the bottom of machine.Ģ.3. Print Plastic Parts Required for Upgradeīefore dissasembling everything, printer out the parts required.ĭownload the following file for the printable parts:Ģ.1. User have to use the 220W Power Supply (sku:XS028). After upgrade, if user install the heated build platform, original power supply cannot be used to supply power to the machine.
0 Comments
Leave a Reply. |